UMM
EN

CN

language
中国
韩国
韩国
韩国
韩国
韩国
imgboxbg

Products Center

Top ten high-end specialty thin material products

搜索
Search

Products

All categories
1钨片2
1钨片3
1钨片
1钨片5
1钨片2
1钨片3
1钨片
1钨片5
Tungsten plates, tungsten sheets
Tungsten plates, tungsten sheets and tungsten targets are usually produced into compacts by powder metallurgy and then heated and forged at high temperatures. Depending on the processing technology and surface treatment, they appear gray-black or bright silver. After rolling with a deformation of more than 60%, the density of the tungsten plate is basically close to the theoretical density of tungsten. Therefore, it has high strength, uniform internal structure and excellent high temperature creep resistance.
0.0 0.0
Product description

Product manual

Tungsten plates, tungsten sheets and tungsten targets are usually produced into compacts by powder metallurgy and then heated and forged at high temperatures. Depending on the processing technology and surface treatment, they appear gray-black or bright silver. After rolling with a deformation of more than 60%, the density of the tungsten plate is basically close to the theoretical density of tungsten. Therefore, it has high strength, uniform internal structure and excellent high temperature creep resistance.

 

Application

It can process ion implantation parts, manufacture electric light sources and electric vacuum parts, produce cover plates in sapphire crystal growth furnaces, heating zones and connectors in vacuum furnaces, sputtering targets for plasma coating, evaporation tungsten boats and other products

 

Dimensions

Thickness (0.05~50mm)×width (50~600mm)×length (100~2000mm)

 

Chemical composition

Brand

Main content%, excluding gas elements Impurity content (ppm)

WP1

W≥99.95%

≤500

HWP1

W≥99.99%

≤100

HWP2

W≥99.999%

≤10

 

We could not find any corresponding parameters, please add them to the properties table

Everyone is watching

欧泰稀材
Mo-Re Target
product manual The ratio of molybdenum to rhenium: MoRe14%, MoRe41%, MoRe44.5%, MoRe47.5% Size range: thickness (0.2-20) × width (≯500) × length (≯1000), can be customized according to customer requirements Process flow: powder mixing → pressing → sintering → forging → annealing → machining → dynamic balance → vacuum degassing → packaging use A type of alloy formed by adding 14% to 47.5% rhenium to molybdenum. After adding rhenium, the ductility, welding performance and formability of the alloy can be greatly improved. Even after high temperature use, the molybdenum-rhenium alloy can still maintain good ductility Sex. Molybdenum-rhenium alloys are widely used in the electronics industry, nuclear industry and aerospace industry.
Molybdenum Niobium Target
Purity: ≥99.95% Density: ≥8.6g/cm3 Melting point: 2468℃ <br> Supply status: cold rolled bright surface Size range: 0.025min X 500max X L<br> Uses: vacuum coating, superconductivity, flat display, touch screen
Molybdenum target
Purity specifications: 99.95%; 99.98%<br> Density: ≥10.10g/cm3<br> Organization: average grain size is less than 150 microns, typical target and surface structure
Molybdenum wire
Molybdenum wire has a high melting point, good winding performance and mechanical processing performance, and good wear resistance. It is often used in the manufacture of winding core wires, brackets, lead wires and heating wires for various electric light sources. Molybdenum wire can also be used for high-temperature spraying to improve the wear resistance of automobile and other mechanical wear parts. Our company adopts special processing technology to produce molybdenum wire special for wire cutting with high strength, good discharge performance, high surface finish, fast cutting speed, long life and low wire tightening frequency. It is mainly used for various non-ferrous metals, steel and magnetism. Material of wire cutting wire.
High purity molybdenum rod/molybdenum bar /molybdenum wire
Metal molybdenum has many excellent properties: high melting point, high creep resistance and low thermal expansion. In the absence of oxygen, molybdenum has quite good corrosion resistance to various acids, metal liquids and molten glass. Within 1100°C, molybdenum is relatively stable in hydrogen, ammonia and nitrogen. After rolling, forging and drawing, the actual density of molybdenum rods can reach or approach the theoretical density, the strength, plasticity, and toughness are further improved, and the forming performance is improved. Therefore, it is widely used as high-temperature furnace components, glass furnace electrodes, electronic tube components, etc. .
High purity nickel powder
Purity 3N5<br> The main specifications are -50 mesh, -150 mesh, -300 mesh, -400 mesh, -500 mesh and can be sieved according to customer requirements. <br>
High purity tantalum rod, tantalum bar
Executive standard: ASTM B 365 GB/T26012-2010<br> Grades: Ta1, Ta2 <br> Purity: 99.95% 99.99%
Previous page
1