UMM
EN

CN

中文 /  EN
language
中国
韩国
韩国
韩国
韩国
韩国
imgboxbg
imgboxbg

Products Center

Top ten high-end specialty thin material products

搜索
Search

Products

All categories
Your location:
Homepage
/
/
/
Ruthenium Dioxide (Ruthenium(IV) Oxide)
1氯化钌1
1氯化钌1
Ruthenium Dioxide (Ruthenium(IV) Oxide)
Ruthenium dioxide, also known as ruthenium(IV) oxide (RuO2), is a black metallic powder. It is insoluble in acids but can dissolve in molten alkalis to form Na2RuO4.
0.0 0.0
Product description

Ruthenium Dioxide (Ruthenium(IV) Oxide)

 

Ruthenium dioxide, also known as ruthenium(IV) oxide (RuO2), is a black metallic powder. It is insoluble in acids but can dissolve in molten alkalis to form Na2RuO4.

Ruthenium dioxide possesses extremely high specific capacitance, excellent conductivity, a relatively wide potential window, and high reversibility in redox reactions. It is primarily used as a chemical catalyst, such as in photocatalytic degradation of toxic substances in wastewater, as an electrodeposition catalyst for aluminum to enhance deposition rate and reduce deposition potential, and to promote hydrogenation/dehydrogenation/dehydration reactions for aromatic and aliphatic organic compounds. Additionally, ruthenium dioxide is employed in the fabrication of resistors, capacitors, fuel cells, and as a conductive phase in thick film resistor pastes. It finds widespread applications in various fields including traditional industries, new energy vehicles, aerospace, and more.

Ruthenium dioxide exists in two polymorphs: one is amorphous, and the other is a rutile-type structure with a tetragonal crystal system. Both polymorphs exhibit electrical conductivity. When ruthenium dioxide is used to prepare resistor pastes, it is typically sintered at 850°C. At this point, the amorphous RuO2 undergoes crystallization into the rutile-type structure, known as the rutile phase. This phase offers good stability, insensitivity to subsequent resistor processing steps, high power load density, low temperature coefficient of resistance, and low noise level. As a result, it becomes a highly reliable and stable resistor material.

 

CAS No: 12036-10-1

Appearance: Black Powder

Specifications: Mainly ≥98%, 99.9%, no distinction in particle size

Density (g/cm³): 7.1

Electrical Resistivity (Ω·cm): 5 × 10⁻⁵

Temperature Coefficient of Resistance: ≤100 × 10⁻⁶

Storage: Store in a dry and sealed place at room temperature and in a cool, ventilated warehouse. Keep away from open flames and heat sources. Avoid direct sunlight. Store separately from oxidizing agents, edible chemicals, etc. Mixing and transportation with oxidizing agents are strictly prohibited.

 

Usage Requirements and Specifications

 Purity

Theoretical Metal Content

Other

Conductive Phase for Thick Film Resistor Paste

98%

59.8%-75%

Spherical-like, Specific Surface Area > 30 m²/g, Average Particle Size < 1 μm (This particle size requirement is conducive to printing and sintering, as well as dispersion and glass infiltration, to achieve stable electrical performance and uniform structure.)

 

Catalyst

98%

75.0%

 

Iron (Fe) content: ≤0.005%, Nitrate (NO3-) content: ≤0.005%

 

 

Keyword:
Ruthenium dioxide
ruthenium(IV) oxide
RuO2
We could not find any corresponding parameters, please add them to the properties table

Everyone is watching

欧泰稀材
There is currently no content to display
Please add data record on website background.