UMM
EN

CN

中文 /  EN

中文

EN

language
中国
韩国
韩国
韩国
韩国
韩国
imgboxbg
imgboxbg

Products Center

Top ten high-end specialty thin material products

搜索
Search

Products

All categories
Your location：
Homepage
/
Product Center
/
Refractory metals and their alloys
/
Molybdenum wire
钼丝
钼丝
Molybdenum wire
Molybdenum wire has a high melting point, good winding performance and mechanical processing performance, and good wear resistance. It is often used in the manufacture of winding core wires, brackets, lead wires and heating wires for various electric light sources. Molybdenum wire can also be used for high-temperature spraying to improve the wear resistance of automobile and other mechanical wear parts. Our company adopts special processing technology to produce molybdenum wire special for wire cutting with high strength, good discharge performance, high surface finish, fast cutting speed, long life and low wire tightening frequency. It is mainly used for various non-ferrous metals, steel and magnetism. Material of wire cutting wire.
0.0 元 0.0 元
Back to list
Contact us
Product description

Molybdenum wire has a high melting point, good winding performance and mechanical processing performance, and good wear resistance. It is often used in the manufacture of winding core wires, brackets, lead wires and heating wires for various electric light sources. Molybdenum wire can also be used for high-temperature spraying to improve the wear resistance of automobile and other mechanical wear parts. Our company adopts special processing technology to produce molybdenum wire special for wire cutting with high strength, good discharge performance, high surface finish, fast cutting speed, long life and low wire tightening frequency. It is mainly used for various non-ferrous metals, steel and magnetism. Material of wire cutting wire.

Surface condition: black wire: during the drawing process of molybdenum wire, the surface will be coated with black graphite emulsion, and the untreated surface is generally uniform black

Application: high-temperature electrical components, electric furnace heating wires, electric wires, etc.

White wire: After chemical cleaning or spotting polishing, the molybdenum wire is bright silver

Storage: Molybdenum wire must be stored in a clean and dry container with a temperature not higher than 28°C and a humidity not greater than 60%. It should be stored strictly separated from chemicals. The white wire is best vacuum packed and the surface of Party B is oxidized. Molybdenum is a brittle material at room temperature, so please don't shake or bump it quickly during transportation.

 

Dimensions and tolerances

Nominal diameter
(μm)

200mm wire weight
(mg/200mm)

200mm wire weight tolerance(%)
(mg/200mm)

diameter tolerance( %)

 

 

Ⅰgrade

Ⅱgrade

Ⅰgrade

Ⅱgrade

20≤d<30

0.65-1.47

±2.5

±3

 

 

30≤d<40

1.47-2.61

±2.0

±3

 

 

40≤d<100

2.61-16.33

±1.5

±3

 

 

100≤d<400

16.33-256.2

±1.5

±4

 

 

400≤d<600

 

 

 

±1.5

±2.5

600≤d<5500

 

 

 

±1.0

±2.0

 

We could not find any corresponding parameters, please add them to the properties table
Previous
High purity tantalum powder
Next
High-purity tantalum plate, tantalum sheet, tantalum foil

Everyone is watching

欧泰稀材
High purity molybdenum rod/molybdenum bar /molybdenum wire
High purity molybdenum rod/molybdenum bar /molybdenum wire
Metal molybdenum has many excellent properties: high melting point, high creep resistance and low thermal expansion. In the absence of oxygen, molybdenum has quite good corrosion resistance to various acids, metal liquids and molten glass. Within 1100°C, molybdenum is relatively stable in hydrogen, ammonia and nitrogen. After rolling, forging and drawing, the actual density of molybdenum rods can reach or approach the theoretical density, the strength, plasticity, and toughness are further improved, and the forming performance is improved. Therefore, it is widely used as high-temperature furnace components, glass furnace electrodes, electronic tube components, etc. .
Molybdenum target
Molybdenum target
Purity specifications: 99.95%; 99.98%<br> Density: ≥10.10g/cm3<br> Organization: average grain size is less than 150 microns, typical target and surface structure
High purity molybdenum powder
High purity molybdenum powder
Purity: 3N8<br> Granularity: -200 mesh<br> Application: high-performance precision alloy casting; high-precision electronics industry, such as thin film transistor liquid crystal displays (TFT-LCD); wiring materials for large-scale integrated circuits in the semiconductor industry; new thin-film solar cells in the solar industry
Tungsten and molybdenum ion implantation parts
Tungsten and molybdenum ion implantation parts
Ion implantation is a kind of material surface modification high and new technology that has been vigorously developed and widely used internationally in the past 30 years. It has realized the optimization of the surface performance of the material or can obtain some new excellent performance. Due to the unique and prominent features of this high-tech, it is a very important technology in modern integrated circuit manufacturing. It uses an ion implanter to achieve semiconductor doping and change the conductivity of the semiconductor and the structure of the transistor.
Previous page
1

Ultra Minor Metals Ltd (UMM) all rights reserved       湘ICP备17001881号       by：www.300.cnchangsha