UMM
EN

CN

中文 /  EN
language
中国
韩国
韩国
韩国
韩国
韩国
imgboxbg
imgboxbg

Products Center

Top ten high-end specialty thin material products

搜索
Search

Products

All categories
Your location:
Homepage
/
/
/
/
Niobium Zirconium Alloy Wire
1铌丝Niobium wire
1铌丝Niobium wire
Niobium Zirconium Alloy Wire
Niobium metal can be cold-pressed into rods, sheets, wire and other products. Niobium can withstand high temperature and high strength, and still has sufficient strength, good plasticity and thermal conductivity above 1000°C. Superconductivity is best at extremely low temperatures. For example, its resistance is close to zero at minus 260°C. It is currently the most important superconducting material.
Specification size: diameter 0.2mm~3.0mm, if you have special requirements, please negotiate
0.0 0.0
Product description

Niobium metal can be cold-pressed into rods, sheets, wire and other products. Niobium can withstand high temperature and high strength, and still has sufficient strength, good plasticity and thermal conductivity above 1000°C. Superconductivity is best at extremely low temperatures. For example, its resistance is close to zero at minus 260°C. It is currently the most important superconducting material.

 

Application: Niobium wire and niobium-zirconium alloy wire are widely used in the fields of chemistry, electronics, aviation and aerospace due to their high melting point, corrosion resistance, and good cold working performance. The addition of zirconium to niobium can significantly improve the oxidation resistance and strength of the material. Niobium and niobium-zirconium alloy wires are widely used in the manufacture of high pressure sodium lamps and anode leads of electrolytic capacitors.

 

Specification size: diameter 0.2mm~3.0mm, if you have special requirements, please negotiate

 

Typical chemical analysis value

chemical composition ,≯(%)

Fe

Si

Ni

W

Mo

Hf

Ta

0.01

0.005

0.005

0.05

0.01

0.02

0.2

O

C

H

N

Zr

Nb

 

0.025

0.01

0.0015

0.01

0.8-1.2

matrix

 
We could not find any corresponding parameters, please add them to the properties table

Everyone is watching

欧泰稀材
Niobium target
Niobium is a kind of refractory rare metal with a steel-gray luster. Its melting point is 2467℃ and its density is 8.6g/cm3. Niobium has good low-temperature plasticity and can be cold-pressed into rods, sheets, wires and other products. Niobium can withstand high temperature and high strength, and still has sufficient strength, plasticity and thermal conductivity above 1000°C. Superconductivity is best at extremely low temperatures. For example, its resistance is close to zero at minus 260°C. It is currently the most important superconducting material.
High purity niobium rod,niobium wire
Grade: Nb-1.Nb-2<br> Standard: GB/T14842-2007<br> Specification: Φ3.0~Φ100mm<br> State: Annealed state (M) or hard state (Y); <br>
Niobium Ingot
Grade: DNb-1.DNb-2<br> Standard: GB/T14841-2008<br> Purity: ≥99.95%<br> Specification: diameter 55-145mm. L<1400mm
Niobium rod/ niobium rod/ niobium bar
Note: Niobium can withstand high temperature and high strength, and still has sufficient strength, plasticity and thermal conductivity above 1000°C. Superconductivity is best at extremely low temperatures. For example, its resistance is close to zero at minus 260°C. It is currently the most important superconducting material.
Previous page
1