Products Center
Top ten high-end specialty thin material products
搜索
Products
All categories
Rhenium crucible
Specification: thickness is 3~6mm, density 18.8g/cc min, purity 99.99% min.Shape and size can be customized.
0.0
元
0.0
元
Product description
Description: rhenium crucible appearance is silver gray, is made by using pure rhenium powder through special molding method, can withstand more than 2000℃ high temperature, mainly used in rare earth elements and gem single crystal growth. Due to its high melting point, good compatibility, excellent oxidation resistance and creep resistance, it is especially favored by gem manufacturers.
Specification: thickness is 3~6mm, density 18.8g/cc min, purity 99.99% min.Shape and size can be customized.
Topical chemical analysis
|
Trace impurities（%，≯） |
|||||
|
Element |
4N Grade |
5N Grade |
Element |
4N Grade |
5N Grade |
|
Na |
0.0010 |
0.0001 |
Ni |
0.0001 |
0.00001 |
|
Mg |
0.0001 |
0.00001 |
Cu |
0.0001 |
0.00001 |
|
Al |
0.0001 |
0.00001 |
Zn |
0.0001 |
0.00001 |
|
Si |
0.0005 |
0.00005 |
As |
0.0001 |
0.00001 |
|
P |
0.0001 |
0.00005 |
Zr |
0.0001 |
0.00001 |
|
K |
0.0010 |
0.0001 |
Mo |
0.0010 |
0.0002 |
|
Ca |
0.0005 |
0.00005 |
Cd |
0.0001 |
0.00001 |
|
Ti |
0.0001 |
0.00001 |
Sn |
0.0001 |
0.00001 |
|
V |
0.0001 |
0.00001 |
Sb |
0.0001 |
0.00001 |
|
Cr |
0.0001 |
0.00001 |
Ta |
0.0001 |
0.00001 |
|
Mn |
0.0001 |
0.00001 |
W |
0.0010 |
0.0002 |
|
Fe |
0.0005 |
0.00005 |
Pb |
0.0001 |
0.00001 |
|
Co |
0.0001 |
0.00001 |
Bi |
0.0001 |
0.00001 |
|
Se |
0.0001 |
0.00001 |
Tl |
0.0001 |
0.00001 |
|
Gas element（%，≯） |
|||||
|
O |
0.1 |
0.06 |
C |
0.005 |
0.002 |
|
N |
0.003 |
0.003 |
H |
0.002 |
0.002 |
Previous
Rhenium plate / sheet /Foil
Everyone is watching
W-25Re </br>
.All copper alloys and titanium alloys
.A36, AISI1020, AISI4140 steel<br>
.A572, HSLA80 Steel<br>
.X80, X70 steel</br>
.Austenitic stainless steel, ferritic stainless steel<br>
.Inconel600, Inconel800 steel
Our company uses solid-liquid mixing to improve the uniformity of rhenium, and at the same time, through multiple forging and annealing to increase the density and improve the structure, improve the performance and life of the anode target. <br>
Specifications: Purity Re≥99.99%~99.999%, shape, size and density accept various customized products. <br>
Rhenium target material is used for magnetron sputtering coating. Magnetron sputtering coating is a new type of physical vapor (PVD) coating method. Compared with evaporation coating method, it has obvious advantages in many aspects. A more mature technology, magnetron sputtering has been used in many fields, such as semiconductor integrated circuits, solar photovoltaics, recording media, flat-panel displays, and workpiece surface coatings.
Rhenium cube is made of high-purity rhenium board Re9999 as raw material, cut, polished and polished. It is a very exquisite collection. The average weight of each cube is about 20-20.5g, and the side length is 10mm*10mm*10mm. It is high-power and high-precision laser. Mark.
<br>
Size: 10mm×10mm×10mm, 25.4mm×25.4mm×25.4mm Laser marking can be customized
Mo-Re alloy is Molybdenum Alloyed with 41% or 47.5% of Rhenium(nominal content of Rhenium is 50%), which has good ductility, weld ability, formability and strength. Mo-Re alloy keeps high ductile even after used in high temperature. Mo-Re alloy are widely used for electronics, nuclear and aerospace applications.
product manual
The ratio of molybdenum to rhenium: MoRe14%, MoRe41%, MoRe44.5%, MoRe47.5%
Size range: thickness (0.2-20) × width (≯500) × length (≯1000), can be customized according to customer requirements
Process flow: powder mixing → pressing → sintering → forging → annealing → machining → dynamic balance → vacuum degassing → packaging
use
A type of alloy formed by adding 14% to 47.5% rhenium to molybdenum. After adding rhenium, the ductility, welding performance and formability of the alloy can be greatly improved. Even after high temperature use, the molybdenum-rhenium alloy can still maintain good ductility Sex. Molybdenum-rhenium alloys are widely used in the electronics industry, nuclear industry and aerospace industry.
Mo-Re alloy is Molybdenum Alloyed with 41% or 47.5% of Rhenium(nominal content of Rhenium is 50%), which has good ductility, weld ability, formability and strength. Mo-Re alloy keeps high ductile even after used in high temperature. Mo-Re alloy are widely used for electronics, nuclear and aerospace applications.
Specification:0.2 min.×（10-500）×1000 max.
Description: Tungsten rhenium alloy is one of the good welding electrode materials. Compared with tungsten thorium alloy electrode and tungsten copper alloy electrode material, tungsten rhenium alloy has stronger high temperature resistance and arc ablation resistance, and it is not like tungsten thorium electrode. Has strong radioactivity. Tungsten-rhenium alloy plays an important role in vacuum or gas shielded welding and special alloy welding. In the face of extreme conditions, tungsten-rhenium alloy is more capable of working under special working conditions.<br>
Application: metal welding, plasma spraying, etc.<br>
Main alloy grades: W-1Re, W-3Re, W-5Re, W-10Re, W-25Re, W-26Re<br>
Note: Other brands and specifications can be customized by agreement.
Previous page
1
Next page
Products
Precious metal functional materials
High-quality optoelectronic materials/high-purity targets
Refractory metals and their alloys
Special alloy/special steel
Spherical | Nano powder
Biomedical/3D printing products
Compound
Rare metals and their alloys
Rare metals and their alloysRare Metal Concept Cultural/Art/Collectible
Nuclear energy Nuclear power Nuclear industry
High temperature heat container
Microelectronics industry Chip thermal sink
Semiconductor equipment MOCVD thermal field
High efficiency & long life Wire for wire cutting
Medical equipment Medical instruments
Artificial bone joint Bioimplantation
Rare metal cultural & creative art collection Precious metal
Plasma|Special Welding Electrode
Ultra Minor Metals Ltd (UMM) all rights reserved 湘ICP备17001881号 by：www.300.cnchangsha