Products Center
Top ten high-end specialty thin material products
搜索
Products
All categories
Rhenium cube
Size: 10mm×10mm×10mm, 25.4mm×25.4mm×25.4mm Laser marking can be customized
0.0
元
0.0
元
Product description
Rhenium cube is made of high-purity rhenium board Re9999 as raw material, cut, polished and polished. It is a very exquisite collection. The average weight of each cube is about 20-20.5g, and the side length is 10mm*10mm*10mm. It is high-power and high-precision laser. Mark.
The surface of the non-mirror rhenium cube is polished by a grinder, which is the effect of wire drawing.
The mirrored rhenium cube is artificially finely polished and polished on the basis of the non-mirror rhenium cube. It is very smooth and basically reaches the mirror surface.
Size: 10mm×10mm×10mm, 25.4mm×25.4mm×25.4mm Laser marking can be customized
Topical chemical analysis
|
Impurity content（%，≯） |
|||||
|
Element |
4N Grade |
5N Grade |
Element |
4N Grade |
5N Grade |
|
Na |
0.0010 |
0.0001 |
Ni |
0.0001 |
0.00001 |
|
Mg |
0.0001 |
0.00001 |
Cu |
0.0001 |
0.00001 |
|
Al |
0.0001 |
0.00001 |
Zn |
0.0001 |
0.00001 |
|
Si |
0.0005 |
0.00005 |
As |
0.0001 |
0.00001 |
|
P |
0.0001 |
0.00005 |
Zr |
0.0001 |
0.00001 |
|
K |
0.0010 |
0.0001 |
Mo |
0.0010 |
0.0002 |
|
Ca |
0.0005 |
0.00005 |
Cd |
0.0001 |
0.00001 |
|
Ti |
0.0001 |
0.00001 |
Sn |
0.0001 |
0.00001 |
|
V |
0.0001 |
0.00001 |
Sb |
0.0001 |
0.00001 |
|
Cr |
0.0001 |
0.00001 |
Ta |
0.0001 |
0.00001 |
|
Mn |
0.0001 |
0.00001 |
W |
0.0010 |
0.0002 |
|
Fe |
0.0005 |
0.00005 |
Pb |
0.0001 |
0.00001 |
|
Co |
0.0001 |
0.00001 |
Bi |
0.0001 |
0.00001 |
|
Se |
0.0001 |
0.00001 |
Tl |
0.0001 |
0.00001 |
Previous
Titanium-rhenium alloy
Everyone is watching
Our company uses solid-liquid mixing to improve the uniformity of rhenium, and at the same time, through multiple forging and annealing to increase the density and improve the structure, improve the performance and life of the anode target. <br>
product manual
The ratio of molybdenum to rhenium: MoRe14%, MoRe41%, MoRe44.5%, MoRe47.5%
Size range: thickness (0.2-20) × width (≯500) × length (≯1000), can be customized according to customer requirements
Process flow: powder mixing → pressing → sintering → forging → annealing → machining → dynamic balance → vacuum degassing → packaging
use
A type of alloy formed by adding 14% to 47.5% rhenium to molybdenum. After adding rhenium, the ductility, welding performance and formability of the alloy can be greatly improved. Even after high temperature use, the molybdenum-rhenium alloy can still maintain good ductility Sex. Molybdenum-rhenium alloys are widely used in the electronics industry, nuclear industry and aerospace industry.
Specifications: Purity Re≥99.99%~99.999%, shape, size and density accept various customized products. <br>
Rhenium target material is used for magnetron sputtering coating. Magnetron sputtering coating is a new type of physical vapor (PVD) coating method. Compared with evaporation coating method, it has obvious advantages in many aspects. A more mature technology, magnetron sputtering has been used in many fields, such as semiconductor integrated circuits, solar photovoltaics, recording media, flat-panel displays, and workpiece surface coatings.
High-density, high-performance rhenium plate precision-rolled rhenium sheet, precision electron beam welding, perfect surface treatment to achieve high emissivity. <br>
Processing method: non-standard parts are processed according to customer drawings; standard accessories K465i, K700, A7 are provided; product repair services are provided. <br>
Rhenium and rhenium alloys can not only go into the sky, but also have special uses in deep submersibles. The alloy formed by titanium base and rhenium has high mechanical properties and can meet the use of large submersibles in the deep sea.<br>
Therefore, titanium-rhenium alloy is one of the important materials for the compressive structural parts of the shell of high-performance deep submersibles in the future. The strategic nuclear submarine made of titanium-rhenium alloy has set the world record for deep diving of nuclear submarines, and its deep diving depth is 1,250 meters.<br>
Main alloy grades: Ti-3Re, Ti-5Re
Mo-Re alloy is Molybdenum Alloyed with 41% or 47.5% of Rhenium(nominal content of Rhenium is 50%), which has good ductility, weld ability, formability and strength. Mo-Re alloy keeps high ductile even after used in high temperature. Mo-Re alloy are widely used for electronics, nuclear and aerospace applications.
Specification:0.2 min.×（10-500）×1000 max.
Mo-Re alloy is Molybdenum Alloyed with 41% or 47.5% of Rhenium(nominal content of Rhenium is 50%), which has good ductility, weld ability, formability and strength. Mo-Re alloy keeps high ductile even after used in high temperature. Mo-Re alloy are widely used for electronics, nuclear and aerospace applications.
Mo-Re alloy is Molybdenum Alloyed with 41% or 47.5% of Rhenium(nominal content of Rhenium is 50%), which has good ductility, weld ability, formability and strength. Mo-Re alloy keeps high ductile even after used in high temperature. Mo-Re alloy are widely used for electronics, nuclear and aerospace applications.<br>
Diameter:φ1~φ17mm
Previous page
1
Next page
Products
Precious metal functional materials
High-quality optoelectronic materials/high-purity targets
Refractory metals and their alloys
Special alloy/special steel
Spherical | Nano powder
Biomedical/3D printing products
Compound
Rare metals and their alloys
Rare metals and their alloysRare Metal Concept Cultural/Art/Collectible
Nuclear energy Nuclear power Nuclear industry
High temperature heat container
Microelectronics industry Chip thermal sink
Semiconductor equipment MOCVD thermal field
High efficiency & long life Wire for wire cutting
Medical equipment Medical instruments
Artificial bone joint Bioimplantation
Rare metal cultural & creative art collection Precious metal
Plasma|Special Welding Electrode
Ultra Minor Metals Ltd (UMM) all rights reserved 湘ICP备17001881号 by：www.300.cnchangsha