UMM
EN

CN

language
中国
韩国
韩国
韩国
韩国
韩国
imgboxbg

Products Center

Top ten high-end specialty thin material products

搜索
Search

Products

All categories
Your location:
Homepage
/
/
/
High purity niobium plate, niobium sheet
1高纯铌片1
1高纯铌片
1高纯铌片2
1高纯铌片1
1高纯铌片
1高纯铌片2
High purity niobium plate, niobium sheet
Grades: Nb1, Nb2, NbZr1, R04210-2
Standard: GB/T3630-2006;
Purity: greater than 99.95%;
State: annealed state (M) or hard state (Y);
Application: Thermal protection and structural materials in aviation and aerospace industries, electronic tubes and other electric vacuum devices, superconducting materials, heat-resistant alloys and cemented carbides, etc.
0.0 0.0
Product description

Product manual

Grades: Nb1, Nb2, NbZr1, R04210-2

Standard: GB/T3630-2006;

Purity: greater than 99.95%;

State: annealed state (M) or hard state (Y);

 

Application: Thermal protection and structural materials in aviation and aerospace industries, electronic tubes and other electric vacuum devices, superconducting materials, heat-resistant alloys and cemented carbides, etc.

 

Dimensions

Thickness(mm)

Width(mm)

Length(mm)

0.1-0.20

30≤W≤200

30≤L≤1500

0.2-1.0

30≤W≤300

30≤L≤1500

1.0-10.0

30≤L≤1000

30≤L≤2000

≥10.0

30≤L≤1000

30≤L≤1000

 

We could not find any corresponding parameters, please add them to the properties table

Everyone is watching

欧泰稀材
Tungsten Titanium Target
Depending on the purpose of use, there are different requirements for the impurity content of high-purity tungsten targets and tungsten-titanium targets. Generally, the chemical purity is required to be between 99.99% and 99.999%. We can also customize other specifications suitable for the application according to user requirements.
Titanium and titanium alloy rods
Titanium and titanium alloy wire: diameter 0.1-8.0mm<br> Titanium and titanium alloy rods: 7-230mm in diameter<br>
High purity cobalt powder
Purity, 4N, main specifications are -50 mesh, -150 mesh, -300 mesh, and can be sieved according to customer requirements. <br> Reduced cobalt powder is gray irregular metal powder, cobalt oxalate reduction method cobalt powder; atomization method produces spherical cobalt powder is silver gray spherical powder with metallic luster<br>
Titanium plate
National standard number: TA0, TA2, TA3, TA5, TA6, TA7, TA9, TA10, TB2, TC1, TC2, TC3, TC4<br> American label number: GR1, GR2, GR3, GR5, GR7, GR12<br> Russian label number: BT1-00, BT1-0, BT1-2, etc. <br>
Niobium target
Niobium is a kind of refractory rare metal with a steel-gray luster. Its melting point is 2467℃ and its density is 8.6g/cm3. Niobium has good low-temperature plasticity and can be cold-pressed into rods, sheets, wires and other products. Niobium can withstand high temperature and high strength, and still has sufficient strength, plasticity and thermal conductivity above 1000°C. Superconductivity is best at extremely low temperatures. For example, its resistance is close to zero at minus 260°C. It is currently the most important superconducting material.
Molybdenum Niobium Target
Purity: ≥99.95% Density: ≥8.6g/cm3 Melting point: 2468℃ <br> Supply status: cold rolled bright surface Size range: 0.025min X 500max X L<br> Uses: vacuum coating, superconductivity, flat display, touch screen
High purity niobium rod,niobium wire
Grade: Nb-1.Nb-2<br> Standard: GB/T14842-2007<br> Specification: Φ3.0~Φ100mm<br> State: Annealed state (M) or hard state (Y); <br>
Niobium Ingot
Grade: DNb-1.DNb-2<br> Standard: GB/T14841-2008<br> Purity: ≥99.95%<br> Specification: diameter 55-145mm. L<1400mm
Previous page
1