UMM
EN

CN

imgboxbg

Products Center

Top ten high-end specialty thin material products

搜索
Search

Products

All categories
1钒粉
1钒粉
Vanadium powder
Description: Product characteristics, high hardness, adding to metal can increase the hardness, toughness, corrosion resistance, wear resistance and impact load ability, etc.
Purpose: Add special steel, super hard material, hard alloy, increase the strength, toughness, corrosion resistance, wear resistance and impact load ability of the alloy.
Purity: V>99.9%
0.0 0.0
Product description

Description: Product characteristics, high hardness, adding to metal can increase the hardness, toughness, corrosion resistance, wear resistance and impact load ability, etc.

Purpose: Add special steel, super hard material, hard alloy, increase the strength, toughness, corrosion resistance, wear resistance and impact load ability of the alloy.

Purity: V>99.9%

Specifications: 100 mesh, 150 mesh, 200 mesh, 250 mesh, 300 mesh, 400 mesh
Packaging: vacuum packaging
Uses: used in electronics, atomic energy industry, aviation, aerospace, material additives, etc.

Product specification table: (also can be customized according to customer needs)

Supply status

Specification(mm)

 

Thickness

Width

Length

Cold rolled state (Y)

0.1~1.0

50~300

100~2000

Recrystallization state (M)

Cold rolled state (R)

1.0~5.0

50~600

100~1500

Recrystallization state (M)

Hot rolled state (R)

5.0~30

50~600

100~1500

We could not find any corresponding parameters, please add them to the properties table

Everyone is watching

欧泰稀材
Rhenium  bar/rod
Classification: according to the different requirements of use,rhenium bar according to the physical properties is divided into "high density rhenium  bar/rod" and "medium density rhenium bar/rod", according to the chemical composition is divided into "high purity 99.99%" and "ultra high purity99.999%. <br> Appearance: Grey or silver metallic square bar or round rod,medium density ingot is dark grey and high density ingot is bright silver.<br>
Rhenium ingot
Classification: according to the different requirements of use,rhenium pellet/ingot according to the physical properties is divided into "high density rhenium pellet/ingot" and "medium density rhenium pellet/ingot", according to the chemical composition is divided into "high purity 99.99%" and "ultra high purity99.999%.<br> Appearance: Grey or silver metallic cylinder or square block,medium density ingot is dark grey and high density ingot is bright silver.<br> Application: Used as an additive for manufacturing superalloys.
High purity rhenium powder
Appearance: Dark grey Metallic Powder<br> Application: Used as rhenium element standard sample; As an additive for superalloys; Raw material for various rhenium parts.
Tungsten crucible
Because tungsten has a melting point of 3410°C, high purity, high density, no internal cracks, precise dimensions, and smooth inner and outer walls, it is widely used in sapphire single crystal growth furnaces, quartz glass melting furnaces, rare earth smelting furnaces and other industrial furnaces The working temperature environment of the core container inside is generally above 2200℃. The tungsten crucible plays a key role in the success rate of seeding, the quality control of crystal pulling, the potting and the service life of sapphire crystal growth.<br> Application: Mainly used in metallurgical industry, mechanical processing, glass and ceramic industry and other fields
Tungsten powder
Tungsten powder is one of the important raw materials for preparing powdered tungsten and its alloy products. It has the highest melting point (3410°C) and the lowest vapor pressure among all metals, which makes it the preferred metal for various high-temperature operating environments . <br> Application: Powdered metal tungsten is the raw material for preparing tungsten processing materials, tungsten alloys and tungsten products;<br> Technical specifications: ordinary W≥99.95% <br>
Molybdenum wire
Molybdenum wire has a high melting point, good winding performance and mechanical processing performance, and good wear resistance. It is often used in the manufacture of winding core wires, brackets, lead wires and heating wires for various electric light sources. Molybdenum wire can also be used for high-temperature spraying to improve the wear resistance of automobile and other mechanical wear parts. Our company adopts special processing technology to produce molybdenum wire special for wire cutting with high strength, good discharge performance, high surface finish, fast cutting speed, long life and low wire tightening frequency. It is mainly used for various non-ferrous metals, steel and magnetism. Material of wire cutting wire.
Molybdenum powder
Appearance: gray metal powder<br> Application: Powdered metal molybdenum is a raw material for preparing molybdenum processing materials, molybdenum alloys and molybdenum products;<br> Technical specifications: Mo≥99.95% (calculated by difference and subtraction, except for gas elements)<br> Particle size 0.4~30 microns Element Content (wt,%) Element Content (wt,%) Mo ≥99.95 W <0.015 Fe <0.005 Pb <0.0005 Ni <0.003 Bi <0.0005 Cu <0.001 Sn <0.0005 Al <0.001 Sb <0.001 Si <0.002 Cd <0.0005 Ca <0.002 P <0.001 K <0.005 S <0.002 Na <0.001 C <0.005 Mg <0.001 O 0.003~0.01 Mn <0.001      
molybdenum deep-processing parts
Appearance: silver white metal<br> Uses: used to make heating parts and heat insulation parts for vacuum blast furnaces, and can be used to make boilers, heaters,<br> Purity: Mo≥99.98%<br> Size range:  can be customized according to customer needs<br> Coolers, various utensils, etc., and have a wide range of applications in aviation, aerospace industry, medical equipment and other fields. Applicable environment and applicable temperature: within 2300℃ under vacuum or inert gas protection environment.<br> Surface classification: 1) Hot rolled alkaline washing 2) Polished surface
Previous page
1