UMM
EN

CN

language
中国
韩国
韩国
韩国
韩国
韩国
imgboxbg

Products Center

Top ten high-end specialty thin material products

搜索
Search

Products

All categories
Your location:
Homepage
/
/
/
/
High purity titanium wire/titanium alloy wire
1钛丝
1钛丝
High purity titanium wire/titanium alloy wire
A. Titanium wire specifications: φ0.8-φ6.0mm
B. Specification of titanium wire for glasses: φ1.0-φ6.0mm dedicated titanium wire
C. Titanium wire specifications: φ0.2-φ8.0mm hanger dedicated
0.0 0.0
Product description

Product manual

A. Titanium wire specifications: φ0.8-φ6.0mm

B. Specification of titanium wire for glasses: φ1.0-φ6.0mm dedicated titanium wire

C. Titanium wire specifications: φ0.2-φ8.0mm hanger dedicated

 

Standard

GB/T, GJB, AWS, ASTM, AMS, JIS

 

Manufacturing process

Hot forging is a forging process performed above the metal recrystallization temperature.
Hot rolling is a rolling process performed at a temperature higher than the recrystallization temperature.
Cold rolling: A rolling process in which the plastic deformation temperature is lower than the recovery temperature.
Annealing: A metal heat treatment process in which the metal is slowly heated to a certain temperature, kept for a sufficient time, and then cooled at an appropriate speed (usually slow cooling, sometimes controlled cooling).
Pickling: The parts are immersed in an aqueous solution such as sulfuric acid to remove oxide films on the metal surface. It is the pre-treatment or intermediate treatment of electroplating, enamel, rolling and other processes.

 

Brand

TA0, TA1, TA2, TA3, TA4, TA5, TA6, TA7, TA9, TA10, TC1, TC2, TC3, TC4, TC6, TC11, GR1, GR2, GR3, GR5 Ti6AL4V ELI, Ti6AL7Nb, Ti13Nb13Zr, Ti1533

 

 

Use

Military, medical, sporting goods, glasses, earrings, headwear, electroplating hangers, welding wire and other industries.

Keyword:
High purity titanium wire
titanium alloy wire
We could not find any corresponding parameters, please add them to the properties table

Everyone is watching

欧泰稀材
Tungsten Titanium Target
Depending on the purpose of use, there are different requirements for the impurity content of high-purity tungsten targets and tungsten-titanium targets. Generally, the chemical purity is required to be between 99.99% and 99.999%. We can also customize other specifications suitable for the application according to user requirements.
High purity titanium target
Purity: 4N-5N <br> Dimensions: diameter 50~400mm, thickness 3~28mm<br> Can be customized according to customer requirements
Titanium plate
National standard number: TA0, TA2, TA3, TA5, TA6, TA7, TA9, TA10, TB2, TC1, TC2, TC3, TC4<br> American label number: GR1, GR2, GR3, GR5, GR7, GR12<br> Russian label number: BT1-00, BT1-0, BT1-2, etc. <br>
Titanium-rhenium alloy
Rhenium and rhenium alloys can not only go into the sky, but also have special uses in deep submersibles. The alloy formed by titanium base and rhenium has high mechanical properties and can meet the use of large submersibles in the deep sea.<br> Therefore, titanium-rhenium alloy is one of the important materials for the compressive structural parts of the shell of high-performance deep submersibles in the future. The strategic nuclear submarine made of titanium-rhenium alloy has set the world record for deep diving of nuclear submarines, and its deep diving depth is 1,250 meters.<br> Main alloy grades: Ti-3Re, Ti-5Re
Previous page
1