UMM
EN

CN

中文 /  EN
language
中国
韩国
韩国
韩国
韩国
韩国
imgboxbg
imgboxbg

Products Center

Top ten high-end specialty thin material products

搜索
Search

Products

All categories
1钼粉3
1钼粉1
1钼粉
1钼粉3
1钼粉1
1钼粉
Molybdenum powder
Appearance: gray metal powder
Application: Powdered metal molybdenum is a raw material for preparing molybdenum processing materials, molybdenum alloys and molybdenum products;
Technical specifications: Mo≥99.95% (calculated by difference and subtraction, except for gas elements)
Particle size 0.4~30 microns Element Content (wt,%) Element Content (wt,%) Mo ≥99.95 W <0.015 Fe <0.005 Pb <0.0005 Ni <0.003 Bi <0.0005 Cu <0.001 Sn <0.0005 Al <0.001 Sb <0.001 Si <0.002 Cd <0.0005 Ca <0.002 P <0.001 K <0.005 S <0.002 Na <0.001 C <0.005 Mg <0.001 O 0.003~0.01 Mn <0.001      
0.0 0.0
Product description

Appearance: gray metal powder
Application: Powdered metal molybdenum is a raw material for preparing molybdenum processing materials, molybdenum alloys and molybdenum products;
Technical specifications: Mo≥99.95% (calculated by difference and subtraction, except for gas elements)
Particle size 0.4~30 microns

Typical chemical analysis

Element

Content (wt,%) Element Content (wt,%)

Mo

≥99.95

W

<0.015

Fe

<0.005

Pb

<0.0005

Ni

<0.003

Bi

<0.0005

Cu

<0.001

Sn

<0.0005

Al

<0.001

Sb

<0.001

Si

<0.002

Cd

<0.0005

Ca

<0.002

P

<0.001

K

<0.005

S

<0.002

Na

<0.001

C

<0.005

Mg

<0.001

O

0.003~0.01

Mn

<0.001

 

 

 

We could not find any corresponding parameters, please add them to the properties table

Everyone is watching

欧泰稀材
Mo-Re Target
product manual The ratio of molybdenum to rhenium: MoRe14%, MoRe41%, MoRe44.5%, MoRe47.5% Size range: thickness (0.2-20) × width (≯500) × length (≯1000), can be customized according to customer requirements Process flow: powder mixing → pressing → sintering → forging → annealing → machining → dynamic balance → vacuum degassing → packaging use A type of alloy formed by adding 14% to 47.5% rhenium to molybdenum. After adding rhenium, the ductility, welding performance and formability of the alloy can be greatly improved. Even after high temperature use, the molybdenum-rhenium alloy can still maintain good ductility Sex. Molybdenum-rhenium alloys are widely used in the electronics industry, nuclear industry and aerospace industry.
Molybdenum Niobium Target
Purity: ≥99.95% Density: ≥8.6g/cm3 Melting point: 2468℃ <br> Supply status: cold rolled bright surface Size range: 0.025min X 500max X L<br> Uses: vacuum coating, superconductivity, flat display, touch screen
Molybdenum target
Purity specifications: 99.95%; 99.98%<br> Density: ≥10.10g/cm3<br> Organization: average grain size is less than 150 microns, typical target and surface structure
Molybdenum wire
Molybdenum wire has a high melting point, good winding performance and mechanical processing performance, and good wear resistance. It is often used in the manufacture of winding core wires, brackets, lead wires and heating wires for various electric light sources. Molybdenum wire can also be used for high-temperature spraying to improve the wear resistance of automobile and other mechanical wear parts. Our company adopts special processing technology to produce molybdenum wire special for wire cutting with high strength, good discharge performance, high surface finish, fast cutting speed, long life and low wire tightening frequency. It is mainly used for various non-ferrous metals, steel and magnetism. Material of wire cutting wire.
High purity molybdenum rod/molybdenum bar /molybdenum wire
Metal molybdenum has many excellent properties: high melting point, high creep resistance and low thermal expansion. In the absence of oxygen, molybdenum has quite good corrosion resistance to various acids, metal liquids and molten glass. Within 1100°C, molybdenum is relatively stable in hydrogen, ammonia and nitrogen. After rolling, forging and drawing, the actual density of molybdenum rods can reach or approach the theoretical density, the strength, plasticity, and toughness are further improved, and the forming performance is improved. Therefore, it is widely used as high-temperature furnace components, glass furnace electrodes, electronic tube components, etc. .
High purity nickel powder
Purity 3N5<br> The main specifications are -50 mesh, -150 mesh, -300 mesh, -400 mesh, -500 mesh and can be sieved according to customer requirements. <br>
High purity tantalum rod, tantalum bar
Executive standard: ASTM B 365 GB/T26012-2010<br> Grades: Ta1, Ta2 <br> Purity: 99.95% 99.99%
Previous page
1